iCasa ICZB-RM11S

ModelICZB-RM11S
VendoriCasa
DescriptionZigbee 3.0 remote control
Exposesbattery, action, linkquality
PictureiCasa ICZB-RM11S

Notes

Pairing

Press and hold All On button on the Remote until the Status LED turns on. Then immediately press the All Off button. The Status LED will blink 5 times quickly to indicate a successful pairing.

Resetting

Press and hold the All On button on the Remote until the Status LED turns on. Then immediately press 5 times the All On button.

Options

How to use device type specific configuration

  • simulated_brightness: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example:
simulated_brightness:
  delta: 20 # delta per interval, default = 20
  interval: 200 # interval in milliseconds, default = 200

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It's not possible to read (/get) or write (/set) this value. The possible values are: recall_*, on, off, brightness_stop, brightness_move_up, brightness_move_down.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.