Feibit SCA01ZB

Model	SCA01ZB
Vendor	Feibit
Description	Smart carbon monoxide sensor
Exposes	carbon_monoxide, battery_low, tamper, battery, linkquality
Picture

Exposes

Carbon monoxide (binary)

Indicates if CO (carbon monoxide) is detected. Value can be found in the published state on the carbon_monoxide property. It's not possible to read (/get) or write (/set) this value. If value equals true carbon monoxide is ON, if false OFF.

Battery low (binary)

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It's not possible to read (/get) or write (/set) this value. If value equals true battery low is ON, if false OFF.

Tamper (binary)

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It's not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.