Tuya TS0505B_2_1
Model | TS0505B_2_1 |
Vendor | Tuya |
Description | Zigbee 3.0 18W led light bulb E27 RGBCW |
Exposes | light (state, brightness, color_temp, color_hs), do_not_disturb, linkquality |
Picture | ![]() |
Options
How to use device type specific configuration
color_sync
: When enabled colors will be synced, e.g. if the light supports both color x/y and color temperature a conversion from color x/y to color temperature will be done when setting the x/y color (default true). The value must betrue
orfalse
state_action
: State actions will also be published as 'action' when true (default false). The value must betrue
orfalse
Exposes
Light
This light supports the following features: state
, brightness
, color_temp
, color_hs
.
state
: To control the state publish a message to topiczigbee2mqtt/FRIENDLY_NAME/set
with payload{"state": "ON"}
,{"state": "OFF"}
or{"state": "TOGGLE"}
. To read the state send a message tozigbee2mqtt/FRIENDLY_NAME/get
with payload{"state": ""}
.brightness
: To control the brightness publish a message to topiczigbee2mqtt/FRIENDLY_NAME/set
with payload{"brightness": VALUE}
whereVALUE
is a number between0
and254
. To read the brightness send a message tozigbee2mqtt/FRIENDLY_NAME/get
with payload{"brightness": ""}
.color_temp
: To control the color temperature (in reciprocal megakelvin a.k.a. mired scale) publish a message to topiczigbee2mqtt/FRIENDLY_NAME/set
with payload{"color_temp": VALUE}
whereVALUE
is a number between143
and500
, the higher the warmer the color. To read the color temperature send a message tozigbee2mqtt/FRIENDLY_NAME/get
with payload{"color_temp": ""}
. Besides the numeric values the following values are accepted:coolest
,cool
,neutral
,warm
,warmest
.color_hs
: To control the hue/saturation (color) publish a message to topiczigbee2mqtt/FRIENDLY_NAME/set
with payload{"color": {"hue": HUE, "saturation": SATURATION}}
(e.g.{"color":{"hue":360,"saturation":100}}
). To read the hue/saturation send a message tozigbee2mqtt/FRIENDLY_NAME/get
with payload{"color":{"hue":"","saturation":""}}
. Alternatively it is possible to set the hue/saturation via:- HSB space (hue, saturation, brightness):
{"color": {"h": H, "s": S, "b": B}}
e.g.{"color":{"h":360,"s":100,"b":100}}
or{"color": {"hsb": "H,S,B"}}
e.g.{"color":{"hsb":"360,100,100"}}
- HSV space (hue, saturation, value):
{"color": {"h": H, "s": S, "v": V}}
e.g.{"color":{"h":360,"s":100,"v":100}}
or{"color": {"hsv": "H,S,V"}}
e.g.{"color":{"hsv":"360,100,100"}}
- HSL space (hue, saturation, lightness)
{"color": {"h": H, "s": S, "l": L}}
e.g.{"color":{"h":360,"s":100,"l":100}}
or{"color": {"hsl": "H,S,L"}}
e.g.{"color":{"hsl":"360,100,100"}}
- HSB space (hue, saturation, brightness):
On with timed off
When setting the state to ON, it might be possible to specify an automatic shutoff after a certain amount of time. To do this add an additional property on_time
to the payload which is the time in seconds the state should remain on. Additionally an off_wait_time
property can be added to the payload to specify the cooldown time in seconds when the light will not answer to other on with timed off commands. Support depends on the light firmware. Some devices might require both on_time
and off_wait_time
to work Examples : {"state" : "ON", "on_time": 300}
, {"state" : "ON", "on_time": 300, "off_wait_time": 120}
.
Transition
For all of the above mentioned features it is possible to do a transition of the value over time. To do this add an additional property transition
to the payload which is the transition time in seconds. Examples: {"brightness":156,"transition":3}
, {"color_temp":241,"transition":1}
.
Do not disturb (binary)
Do not disturb mode, when enabled this function will keep the light OFF after a power outage. Value can be found in the published state on the do_not_disturb
property. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"do_not_disturb": NEW_VALUE}
. If value equals true
do not disturb is ON, if false
OFF.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.