Moes ZHT-SR


Model	ZHT-SR
Vendor	Moes
Description	Smart ring thermostat
Exposes	climate (current_heating_setpoint, local_temperature, local_temperature_calibration, system_mode, running_state, preset), eco_temperature, child_lock, deadzone_temperature, max_temperature_limit, min_temperature_limit, sensor_mode, floor_temperature, high_protect_temperature, low_protect_temperature, backlight_brightness, screen_time, rgb_light
Picture

Exposes

Climate

This climate device supports the following features: current_heating_setpoint, local_temperature, local_temperature_calibration, system_mode, running_state, preset.

current_heating_setpoint: Temperature setpoint. To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"current_heating_setpoint": VALUE} where VALUE is the °C between 5 and 45. Reading (/get) this attribute is not possible.
local_temperature: Current temperature measured on the device (in °C). Reading (/get) this attribute is not possible.
system_mode: Mode of this device. To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"system_mode": VALUE} where VALUE is one of: off, heat. Reading (/get) this attribute is not possible.
preset: Mode of this device (similar to system_mode). To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"preset": VALUE} where VALUE is one of: Manual, Temporary manual, Program, Eco. Reading (/get) this attribute is not possible.
running_state: The current running state. Possible values are: idle, heat. Reading (/get) this attribute is not possible.
local_temperature_calibration: Offset to add/subtract to the local temperature. To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"local_temperature_calibration": VALUE}.The minimal value is -10 and the maximum value is 10 with a step size of 1.

Temperature for eco mode. Value can be found in the published state on the eco_temperature property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"eco_temperature": NEW_VALUE}. The minimal value is 10 and the maximum value is 30. The unit of this value is °C.

Child lock (binary)

Enables/disables physical input on the device. Value can be found in the published state on the child_lock property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"child_lock": NEW_VALUE}. If value equals LOCK child lock is ON, if UNLOCK OFF.

Deadzone temperature (numeric)

The delta between local_temperature and current_heating_setpoint to trigger Heat. Value can be found in the published state on the deadzone_temperature property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"deadzone_temperature": NEW_VALUE}. The minimal value is 0.5 and the maximum value is 5. The unit of this value is °C.

Max temperature limit (numeric)

Maximum temperature limit. Cuts the thermostat out regardless of air temperature if the external floor sensor exceeds this temperature. Only used by the thermostat when in AL sensor mode.. Value can be found in the published state on the max_temperature_limit property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"max_temperature_limit": NEW_VALUE}. The minimal value is 35 and the maximum value is 45. The unit of this value is °C.

Min temperature limit (numeric)

Minimum temperature limit for frost protection. Turns the thermostat on regardless of setpoint if the temperature drops below this.. Value can be found in the published state on the min_temperature_limit property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"min_temperature_limit": NEW_VALUE}. The minimal value is 1 and the maximum value is 15. The unit of this value is °C.

Sensor mode (enum)

IN - internal sensor, no heat protection. OU - external sensor, no heat protection. AL - internal sensor for room temperature, external for heat protection. Value can be found in the published state on the sensor_mode property. It's not possible to read (/get) or write (/set) this value. The possible values are: IN, OU, AL.

Floor temperature (numeric)

Floor temperature. Value can be found in the published state on the floor_temperature property. It's not possible to read (/get) or write (/set) this value. The unit of this value is °C.

High protect temperature (numeric)

High protect temperature. Value can be found in the published state on the high_protect_temperature property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"high_protect_temperature": NEW_VALUE}. The minimal value is 10 and the maximum value is 70. The unit of this value is °C.

Low protect temperature (numeric)

Low protect temperature. Value can be found in the published state on the low_protect_temperature property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"low_protect_temperature": NEW_VALUE}. The minimal value is 0 and the maximum value is 10. The unit of this value is °C.

Backlight brightness (numeric)

Backlight brightness. Value can be found in the published state on the backlight_brightness property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"backlight_brightness": NEW_VALUE}. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Screen time (enum)

Screen on time. Value can be found in the published state on the screen_time property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"screen_time": NEW_VALUE}. The possible values are: 10_seconds, 20_seconds, 30_seconds, 40_seconds, 50_seconds, 60_seconds.

Rgb light (binary)

Value can be found in the published state on the rgb_light property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"rgb_light": NEW_VALUE}. If value equals ON rgb light is ON, if OFF OFF.