TERNCY TERNCY-SD01

ModelTERNCY-SD01
VendorTERNCY
DescriptionKnob smart dimmer
Exposesbattery, action, direction, linkquality
PictureTERNCY TERNCY-SD01

Notes

Channel

This device does not work on Zigbee channel 20-24.

Pairing

Press and hold the knob on the device for 8 seconds (until the indicator blinks blue light 3 times) the indicator will continue blinking blue light if pairing is successful otherwise it will blink red light.

Deprecated click event

By default this device exposes a deprecated click event. It's recommended to use the action event instead.

To disable the click event, set legacy: false for this device in configuration.yaml. Example:

devices:
  '0x12345678':
    friendly_name: my_device
    legacy: false

OTA updates

This device supports OTA updates, for more information see OTA updates.

Options

How to use device type specific configuration

  • legacy: Set to false to disable the legacy integration (highly recommended), will change structure of the published payload (default true). The value must be true or false

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It's not possible to read (/get) or write (/set) this value. The possible values are: single, double, triple, quadruple, rotate.

Direction (text)

Value can be found in the published state on the direction property. It's not possible to read (/get) or write (/set) this value.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.